Updated Nov 19, 2026· 9 min read

Key takeaways

  • The best cold brew coffee filters for mason jars turn a wide mouth jar into a clean, grit-free brewer. Compare five stainless steel filters with specs.

The best cold brew coffee filters for mason jars are stainless steel mesh inserts sized for wide mouth jars, and the right pick depends on the jar size you brew in most. For a standard 32 ounce or 1 quart jar, the Kolob Brew Tube is the most established option, while 64 ounce batch brewers are better served by the Fermus filter or the Glyntrof filter and lid set. Every filter here is reusable, drops into a jar you already own, and lifts out with the grounds when the steep finishes, so there is no separate straining step.

As an Amazon Associate, we earn from qualifying purchases.

Quick Answer

Choose the Kolob Brew Tube for 1 to 2 quart wide mouth jars and the longest track record in this category. Choose the Fermus 64 ounce filter for half gallon batches, the Glyntrof set if you also want a pour spout lid, the iAesthete for its extra fine mesh bottom, and The Tea Spot filter for the widest jar size range and a grip handle for pouring.

How to Choose

Start with jar fit, because every filter here is built for wide mouth mason jars and none of them fits a regular mouth jar. Measure the jar you actually brew in. Quart jars are the most common cold brew size and suit one or two drinkers; a 64 ounce, or 2 quart, jar doubles the batch and suits households that keep a pitcher of concentrate in the fridge all week. Match the filter length to the jar: a filter made for a 64 ounce jar will not seat properly in a quart jar, and a short quart filter leaves grounds floating loose in a tall half gallon jar.

Mesh fineness is the second decision. Cold brew uses a coarse grind and a long steep, so the mesh has to hold back coarse grounds for 12 to 24 hours without clogging. Finer mesh, especially a reinforced fine mesh bottom panel like the one on the iAesthete, keeps more sediment out of the finished coffee. Coarser mesh drains faster when you lift the filter out but lets more fine particles through, which shows up as sludge in the last glass. If you grind at home, a consistent coarse grind matters more than small differences between these meshes.

Construction details separate the picks. All five filters use stainless steel mesh, and most specify food grade 304 stainless, which resists rust and coffee oils better than plated or plastic frames. A silicone seal ring, included with the Fermus and Glyntrof filters, keeps the filter seated against the jar rim so grounds cannot slip around the edge during the steep. Lids are the other variable: the Glyntrof set adds a pour spout handle lid that turns the jar into its own serving pitcher, while the other four are filter only, so the jar keeps its standard two piece canning lid for storage.

Finally, think about cleanup. A filter that opens wide at the top dumps spent grounds in one motion and rinses clean under the tap, while narrow tubes may need a brush to clear grounds packed at the bottom. Rinse after each batch and dry the filter fully before storing so coffee oils do not go stale inside the mesh.

Kolob Brew Tube Cold Brew Coffee Filter

The Brew Tube from Kolob is the premium pick and the design most mason jar cold brewers start with. It is a stainless steel mesh tube sized for wide mouth jars from 1 to 2 quarts, so one filter covers the two most common batch sizes. The listed dimensions, 3.25 by 2.75 by 5.75 inches, put the top rim at the jar mouth with the mesh body hanging into the water, keeping the grounds submerged during the steep. At 2.4 ounces it is light, rigid, and easy to lift out by the rim when the brew is done. The same tube works for iced tea and fruit infusions. Choose this one if you want the category’s reference design in the standard quart size.

Specs:

  • Material: Stainless steel mesh
  • Fit: Wide mouth mason jars, 1 to 2 quart
  • Model: KCBT32
  • Dimensions: 3.25 x 2.75 x 5.75 inches
  • Weight: 2.4 ounces
  • Includes: Filter tube only, jar and lid not included

The Tea Spot Craft Cold Brew Filter

The Tea Spot’s Craft Cold Brew Filter is the design led pick, built around a stainless steel mesh filter with a handle and rubberized grips so the jar pours like a pitcher once brewing is done. The listing states fit for wide mouth mason jars in 12, 16, 32, and 64 ounce sizes, the widest size range in this roundup, which makes it the flexible choice for households that brew single servings and full batches in different jars. The mesh strains the beverage as you serve, so the filter can stay in the jar in the fridge rather than coming out right after the steep. Choose it if one filter has to cover every jar size you own.

Specs:

  • Material: Stainless steel mesh
  • Fit: Wide mouth mason jars, 12 to 64 ounces
  • Model: 4-700
  • Handle: Rubberized grip handle for pouring
  • UPC: 855129005937
  • Includes: Filter with handle, jar not included

iAesthete Cold Brew Coffee Filter

The iAesthete filter is the mid range pick for drinkers who care most about a clean cup. Its food grade 304 stainless steel mesh is described as ultra fine, and the design adds an even finer mesh section at the bottom of the tube, which is where sediment collects as the brew settles. That two stage approach targets the grit that plain single mesh tubes let through at the end of a long steep. The filter is made for wide mouth mason jars and has been sold on Amazon since 2017, giving it one of the longer sales histories in this group. It is a filter only design with no lid or seal ring, so it pairs with the jar’s standard lid. Choose it if your grinder produces a lot of fines and you want the finest mesh here.

Specs:

  • Material: Food grade 304 stainless steel
  • Mesh: Ultra fine mesh with finer mesh bottom panel
  • Fit: Wide mouth mason jars
  • Model: 8541893315
  • UPC: 756155825400
  • Includes: Filter only, jar and lid not included

Fermus Cold Brew Coffee Filter for 64 Ounce Jars

The Fermus filter is the mid range pick sized specifically for the big 64 ounce, 2 quart wide mouth jar. It is a 304 stainless steel strainer with a seal ring design: the included silicone ring seats the filter against the jar rim so water and grounds stay on the correct side of the mesh during a long steep. The package includes the mesh filter and the seal ring, and the taller body suits the depth of a half gallon jar better than quart sized tubes, which can leave the top of the grounds above the water line in a tall jar. Like the others, it doubles as an infuser for iced tea and fruit drinks. Choose it if you brew half gallon batches and want a seal ring fit instead of a loose hanging tube.

Specs:

  • Material: 304 stainless steel
  • Fit: 64 ounce, 2 quart wide mouth mason jars
  • Model: FE 64oz Mason Jar Filter
  • Seal: Silicone seal ring included
  • Includes: Mesh filter and seal ring, jar not included

Glyntrof Cold Brew Coffee Filter with Pour Spout Lid

Check price on Amazon

The Glyntrof set is the budget friendly kit pick because it bundles the two parts most jar brewers end up buying anyway: a 304 stainless steel filter with a seal ring, and a pour spout handle lid that fits the same jars. The listing covers both 32 ounce and 64 ounce wide mouth mason jars, and with the spout lid fitted the brewing jar becomes the serving pitcher, so there is no transfer step and no second container to wash. The filter itself is a standard mesh strainer design with the silicone ring keeping it seated at the rim. Choose it if you are starting from zero and want the filter and a pouring lid in one box.

Specs:

  • Material: 304 stainless steel strainer
  • Fit: 32 ounce and 64 ounce wide mouth mason jars
  • Lid: Pour spout handle lid included
  • Seal: Silicone seal ring included
  • Includes: Filter, seal ring, and pour spout lid, jar not included

Who Should Skip Mason Jar Filters

Skip this style of filter if you do not already own wide mouth mason jars, because none of these filters includes the jar, and buying jars plus a filter can cost as much as a complete cold brew maker with its own pitcher and filter. Skip them if you want paper filtration: steel mesh, however fine, passes more micro sediment than a paper or cotton filter, so drinkers who want a completely grit free cup should look at cotton sock style filters or a paper filtered brewer instead. Skip them, too, if you brew small single servings in a French press you already own; a jar filter earns its place at quart and half gallon batch sizes, not for one glass at a time.

Frequently Asked Questions

Do these filters fit regular mouth mason jars?

No. Every filter in this roundup is sized for wide mouth mason jars, and the wider opening is what lets the filter body slide in and out with the grounds inside. A regular mouth jar has a narrower neck than the filter rim, so the filter cannot be inserted. Check the jar description before ordering, because quart jars are sold in both mouth sizes.

How much coffee and water should go in the filter?

A common starting ratio for jar cold brew is about 1 cup of coarsely ground coffee per quart of cold water, with the grounds placed inside the filter and the water poured over slowly so everything saturates. Steep 12 to 24 hours in the refrigerator, then lift the filter out and let it drain for a few minutes. The result is a concentrate that most drinkers dilute with water or milk when serving.

Will a steel mesh filter keep all the sediment out?

It keeps out the grounds themselves, but very fine particles can pass through any reusable steel mesh, so a small amount of sediment in the last glass is normal. Grinding coarse and consistent, and letting the jar rest a few minutes after removing the filter, reduces it. The iAesthete’s finer mesh bottom panel is the strongest sediment control in this group; for a completely clean cup, pour the finished brew through a paper filter as a second step.

Can these filters make iced tea and infused water too?

Yes. The same mesh tubes work as infusers: loose leaf tea, fruit, or herbs go inside the filter and steep in cold water without loose pieces floating in the jar. Several of the listings, including the Kolob Brew Tube and the Fermus filter, state tea and fruit infusion use directly. Rinse the filter well between coffee and tea batches so flavors do not carry over.

Final Verdict

For most people, the Kolob Brew Tube is the right first mason jar cold brew filter: it fits the standard 1 to 2 quart wide mouth jars, and its simple rigid tube design is the category benchmark. Half gallon brewers should pick the Fermus for its seal ring and tall body, or the Glyntrof set if a pour spout lid is also on the shopping list. The iAesthete is the pick for the cleanest cup thanks to its finer mesh bottom, and The Tea Spot filter suits anyone who wants one filter to cover jars from 12 to 64 ounces with a proper pouring handle.

Check price on Amazon

Check price on Amazon

Check price on Amazon

Check price on Amazon

A
affadmin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Cold Brew Filters for Mason Jars: 5…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Subscribe & Save

Set up recurring deliveries of everyday items on eligible products. Terms and savings are set by Amazon.

Explore Subscribe & Save
Amazon Wedding Registry

Collect the home and kitchen items you want in one registry that guests can shop from.

Create a wedding registry
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.